FXpansion DR-008 - Manual (Page 5)

5
fxpansion DR-008
www.fxpansion.com
Continued on page 6
The following files and folders will be installed:
• • DR-008.DLL - the main engine and VST interface.
• • Dr8Dxi2.DLL - the Dxi interface.
• • MODULES Folder - the folder where all the modules are kept. New
modules from FXpansion or third parties can be placed in here.
• • WIZARDS Folder - the folder where DR-008's import wizards are kept.
New wizards.
• • PRESETS Folder - where presets for all DR-008's modules are stored.
Please take time to register DR-008. Registration will give you access to free
technical support and a host of new kits for DR-008.
The CD also contains GMEDIA Music’s GForce Multi-Format Groove Library.
The Groove Library has been specifically created for DR-008 and features
fifteen different drum kits and more than 200 MIDI loops. Further
information about loading these files can be found on page 32.
2.2 The Configuration Screen
The Configuration screen is displayed
the first time your VST or Dxi host
program loads DR-008. If you’re using
Logic Audio, you will need to press the
ENTER key to dismiss this window the
first time you see it – for some reason Logic disables the mouse while it’s loading,
so you won’t be able to change any of the settings the first time around. You can
also access the Configuration screen at any time when using DR-008 – just press
the CONFIG button in the menu area. Note that you’ll have to re-load DR-008 after
changing the output configuration, path locations, or automation mode. So, what
do all these options do?