Future Retro Swynx User Manual
Page 8
DIN SYNC OUT
The DIN SYNC OUT sends DIN Sync clock/start/stop messages in
24ppq format.
Connect this output to the DIN Sync IN of the device you want to sync.
CR-78, ARP/SEQ SWITCH
This switch determines if the phone jack will produce Clock and Write
signals for the CR-78, or Analog Clock and Reset signal for analog
sequencers and arpeggiators.
To make changes to this setting, first stop playback of the master MIDI
clock being sent to the Swynx. Slide the switch to the desired mode.
Playback of the master MIDI clock can then be resumed.
The analog clock will have a 50% duty for each clock pulse.