Future Retro Swynx - Manual (Page 18)

PREPARING THE CR-78 FOR PROGRAMMING
•
Connect the MIDI OUT of a MIDI keyboard to the MIDI IN of the
Swynx.
•
Connect the Ring portion of the Swynx phone jack to the Write IN of
the CR-78.
•
Set the analog output switch on the Swynx to the CR-78 position.
•
Select one of the CR-78’s four user memory locations to write to.
•
Set the CR-78 Programmer switch to the ALL position, and press the
CLEAR key. This clears out the contents of this user memory
location.
•
Connect the Tip portion of the Swynx phone jack to the CR-78’s
Clock IN.
•
Set the CR-78 Programmer switch to the MEMORY position.
•
Press the Start/Stop switch of the CR-78.
•
The CR-78 is now ready to be programmed.