Future Retro Swynx - Manual (Page 19)

STEP WRITE: PROGRAMMING THE CR-78
•
Use the Instrument Selector of the CR-78 to select an instrument
track to write.
•
Set the note duration to be written into the CR-78 using the Swynx
Time Signature control. Note durations are indicated by the outer
ring of numbers displayed around the Time Signature control.
•
To write a note-on for the current step, play any white key on your
MIDI keyboard. The CR-78 will then advance to the next step.
•
To advance the CR-78 to the next step without writing a note, play
any black key on your MIDI keyboard.
•
Patterns in the CR-78 are all two bars in length. Keep track of what
position you are currently writing to.
•
Once two bars are programmed, you can continue adding notes to
this instrument track, or select another instrument track to write.
•
Repeat these steps until all four tracks have been written.