Pip c, Onnections – Philips TP3267C User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□
M
ore
PIP C
onnections
)IP hookup with Cable
Converter Box and VCR.
C
b
EC51N1
First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE IN on the Cable
Converter and the ANTENNA
plug on the rear of the TV,
<|> Connect the CABLE OUT
on the Cable Converter to the
ANT. IN on the VCR.
<|> Connect the VIDEO OUT
jack on the VCR to the VIDEO
IN jack on the TV.
Also connect the AUDIO OUT
(R and L) jacks from the VCR to
the AUDIO IN jacks on the TV
VIDEO IN
(YELLOW)
CONNECT TO TV
ANTENNA/CABLE
INPUT PLUG
RCAPHONO
PLUG CABLES
(NOT SUPPLIED)
\
OUT
AUDIO IN
(RED/WHITE)
Contact the Parts
Infomiation Center
1-800-292-6066
to order any optional
accessories.
Remember, to ~
use the Cable TV
Converter Box to
select channels for
PIP, the VCR must
be set to the same
channel as the chan
nel selection switch
on the rear of the
Cable Converter
(either channel 3 or
4).
VCR
CABLE TV CONVERTER
34