Philips VR302 - Manual (Page 23)

BEFORE YOU CALL FOR TECHNICAL ASSISTANCE
11
Symptom Possible cause
The video recorder does not respond to any button being
pressed.
No piayback functions are possibie
Video recorder piayback quaiity is poor
Recording is not possibie
Timed recording does not start
No power suppiy.
The chiid iock is activated.
Technical disturbance:disconnect from the mains for 30 sec.
Timed recording is taking place.
No recording on the cassette.
The end of tape has been reached.
The programme number for the video recorder has not been
selected or correctly stored.
For hired recordings: use the ‘Auto-tracking’ button.
Poor quality or badly worn cassette.
Loose aerial cable/ AV-Euroconnector.
The channel control hasn’t been properly adjusted.
TV channel hasn’t been stored.
A wrong programme number has been chosen.
Cassette is protected against erasure.
Recording data is incorrect.
Clock on the video recorder isn’t correctly set.
Cassette is protected against erasure.
The end of tape has been reached.
Video recorder was in ‘Tuner mode’.
Remote control does not work
TECHNICAL DATA *
ACCESSORIES
12
Batteries are exhausted.
Influence from fluorescent lamps or bright sunlight.
TV/VCR selector is in TV position.
VCR1/VCR2 definition is wrong.
General
Meins voltage
Mains frequency
Power consumption
Wind/rewind time
Ambient temperature during
operation
Humidity
Dimensions
Weight
Position for use
Video resolution
Audio
220 to 240 V
48 to 52 Hz
16 W typical (9 W typ.in standby)
240 sec. typical for E-180
+ 10°Cto +35 °C
20% to 80%
420 X 350 X 89 mm (incl.feet)
6,5 kg approx.
max. 15° inclination on all sides
> 240 lines
80Hz-10KHz(< 8dB)
This product complies with the Radio Interference requirements
of the Council Directive (82/499/EEC).
• Data subject to change without notice.
Packed with this video recorder are:
• Aerial cable
• Remote control unit and batteries
• Mains cable
@ 19