Philips VR302 - Manual (Page 10)

• When the automatic channel search finds a TV channel, its
picture appears on the TV screen.
The display will show e.g.:
• Press button again if it isn’t the desired TV channel
or if the picture quality is poor.
The video recorder will search for the next TV channel.
O The video recorder will propose a programme number
(e.g. P 01) in which to store the TV channel.
If you wish to store it in another programme number, press
buttons + or — to change the programme numbers.
If it is for instance the TV channel ‘BBC2’, then in our
example it would be number ‘2’.
A tip: If the reception of the TV channel is not optimum, then we
advise that you operate button 9 to start the automatic fine
tuning.
Please note: During the first installation the video recorder
proposal for a programme number starts with ‘01’. It increases
automatically by one number every time you store a channel.
© if the programme number is correct and the TV channel
reception is good, store them by pressing button
® Repeat steps ©to © until all the desired TV channels are
stored.
Direct channel storage
O Switch on the TV set and select the programme number for
the video recorder (in our example number ‘8’ or ‘AV’).
© Switch on the video recorder by pressing button ■.
© The video recorder will show a programme number as a
memory position (in our diagram, for example, this is ‘P 01’).
If you would rather store another number press buttons +
or — to change the programme number.
O Press button The display will show a flashing
channel number (in our diagram, for example, this is ‘C 02’).
Enter the desired channel number in 3 digits by pressing buttons
+ or — or the digit buttons 0-9 (e.g. ‘027’ for ‘channel 27’).
© The image of the TV channel received will appear on the TV
screen. •
• If it isn’t the desired TV channel or if the picture quality is
poor, enter another channel number.
A tip: If the reception of the TV channel is not optimum, then we
advise that you operate button 191 to start the automatic fine
tuning.
• As soon as the right TV channel is found, store it by pressing
button kioi;i=i.
© Repeat steps © to © until all the desired TV channels are
stored.
Availability tabie for special cable TV
If you possess cable TV equipment with special availability, you
must enter the already defined channel numbers for the special
channels.
Proceed as described in section ‘Direct channel storage’ and
enter the channel numbers of the following table at step O ■
Further information about the channel numbers is available from
your cable TV supplier.
Special channel/channel number
SI 080 SII 090 S21 100 S31 110
S2 081 S12 091 S22 101 S32 111
S3 082 S13 092 S23 102 S33 112
S4 083 S14 093 S24 103 S34 113
S5 084 S15 094 S25 104 S35 114
S6 085 S16 095 S26 105 S36 115
S7 086 S17 096 S27 106 S37 116
S8 087 S18 097 S28 107 S38 117
S9 088 S19 098 S29 108 S39 118
S10 089 S20 099 S30 109 S40 119
S41 120