beautypg.com

Maintenance, Recycling, Additional information – Philips CDC926 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

@>

ADDITIONAL INFORMATION

m

3

(£_

3»'

3"

MAINTENANCE

The CDs

• Never write on the printed side of a CD.
• Do not attach any stickers to the CD.
• Keep the shiny surface of the disc clean.

Use a soft, lint-free cloth, and always wipe

the disc in a straight line from centre to

edge.

• Never use cleaning agents for

conventional records.

• Detergents or abrasive cleaning agents

should not be used either.

The changer

• A chamois leather, slightly moistened with water, is

sufficient for cleaning the changer.

• Do not use cleaning agents containing alcohol, spirits,

ammonia or abrasives.

RECYCLING

Please observe the local regulations regarding the disposal of

packing materials, exhausted batteries and old equipment.

1. All unnecessary packaging material has been omitted. We

have done our utmost to make the packaging easily

separable into three single materials:

- cardboard (box)
- expandable polystyrene (buffer)
- polyethylene (bags, protective foam sheet)

2. Your set consists of materials which can be recycled if dis­

assembled by a company that specializes in that area.

3. Do not dispose of exhausted batteries with your household

waste.

4. Note: Switching off the standby mode overnight will save

energy.

TECHNICAL DATA_______________________________

Typical Audio Performance

Frequency range;..................................................2 Hz - 20 kHz

Amplitude linearity:............................... 0,2 dB (20 Hz - 20 kHz)

Dynamic range:................................................>100dB(1 kHz)
Signal-to-noise ratio:........................................>100 dB (1 kHz)
Channel separation:.........................................>100 dB (1 kHz)

Total harmonic distortion:................................... - 90 dB (1 kHz)

D/A conversion; Bitstream conversion (256 x oversampling,

1 bit), in differential mode

Audio output level:.......................................................... 2

Impedance PHONES socket (CDC 926 only): 8 -1000 ohms

Power supply

Main voltage and frequency:

see the type plate on the rear of the changer

Power consumption:....................................................... <10 W

Safety requirements;..............................................UL and CSA

Cabinet

Material/finish: ...metal and polystyrene with decorative trim
Dimensions (w x h x d);

..............................17“x 4 >/8"x 14 e/8'7435 X 106 X 380 mm)

Weight:................................................. 15.44 lbs (7 kg) approx.

Specifications are subject to change without notice.

16