Philips CDC926 - Manual (Page 12)

m
3
ÍQ.
55'
3"
REPEATING PLAY (REPEAT)
Repeating a CD:
• Press REPEAT 77 before or during playback of the CD.
- REPEAT DISC lights up; the CD will now be repeated
continuously.
ffPCATOtSC
7 1 0 4 1
• Press REPEAT twice to stop the CD being repeated.
Repeating all CDs:
• Press REPEAT 77 twice before or during playback.
- REPEAT lights up; all CDs will now be repeated continuously.
$ 7 10
• Press REPEAT again to stop the CDs being repeated.
CALLING UP INFORMATION ON THE DISPLAY (DISPLAY)
In STOP mode:
Text display
- After loading the CDs and closing the CD compartment, the
display shows the number of the CD to be played (= default
display in STOP mode).
During play:
7.Time display
- When you start play (from STOP mode), the display shows
the elapsed playing time of the current track (= default
display in PLAY mode).
S 4 7 4 ■ * 1 0
• Press DISPLAY 7 7 whenever you want to know the
remaining playing time of the current track (REM TRACK
TIME).
TRACK ROI TRACK TBK
• Press DISPLAY again if you wish to know the remaining
playing time of the entire CD (TOTAL REM TIME).
vlv
O ^ TRACK TOTAL ntM TSK
7^ 2 Hu-Sb
2 r4 S4 7 4 4 1 9 4 l
/Vote -TOTAL REM(aining) TIME indication is not available in
SHUFFLE mode.
• If you wish to know the total playing time of the CD, you
must go back to STOP mode first and then press DISPLAY.
- The display now shows the number of tracks and the total
playing time of the current CD (TOTAL TIME).
TRACK TOTAL
4 4 7 «
2.Text display
• If you press DISPLAY again, you will switch to text display;
the display shows the number of the current CD.
ACTIVATING THE FADE- IN AND FADE-OUT FUNCTION
(FADER)_____________________________________________
NOTE!
The FADER function can be used if the changer is connected to
the amplifier or the system via the ANALOG OUT output or the
DIGITAL OUT output.
• During play press FADER 77.
- The sound level will now gradually decrease (FADE OUT),
after which the changer will go into the PAUSE mode.
FBdE R o t = I - R d E
• Press FADER again.
- Play continues and the sound level will increase again to the
originally set level (FADE IN).
F R d E _
SEARCHING FOR THE LOUDEST PASSAGE
(PEAK SEARCH)_______________________________________
• In STOP mode, press PEAK SEARCH 19.
- SELECT D/SC lights up.
• Select the number of the required CD using DISC SELECT 6
or DISC 6 (on the remote control - CDC926 only).
- The CD will now be scanned for the loudest passage (the
peak).
- The display shows the track being scanned and its elapsed
' playing time.
- When the loudest passage has been found, it will be
repeated continuously (from 2 seconds before the peak until
2 seconds after the peak)
• You can now adjust your recording device.
• You can stop the scan by pressing STOP/CP 73; if you press
PLAY/REPLAY 74, the CD will be played from the beginning.
NOTE!
- When searching for the loudest passage in a programme,
(from one or more CDs) there is no need to enter the CD
number(s).
- If you wish to record tracks from different CDs, you have to
repeat peak search for each CD.
ADJUSTING THE SOUND LEVEL
(- VOLUME + - CPC926 on!y)_____________________________
NOTE!
- Use the - VOLUME + keys (on the remote control - CDC
926 only) only if the player is connected via the ANALOG
OUT output or the DIGITAL OUT output to an amplifier or
HiFi system without its own control.
- The setting chosen with - VOLUME + will be cancelled
when the player is switched off.
• Hold - VOLUME 7 (on the remote control) pressed down.
- The output signal from the player will now decrease
gradually.
- The successive steps are shown on the display.
UOLEE UDLEz LIDL5_ U D L E U D L =
• Release the key as soon as the required sound level is obtained.
• Hold VOLUME + 7 (on the remote control) pressed down.
- The output signal will now increase again gradually to the
maximum level.
U D L - UnL = U U L E 1 U0LE_ U D L r r U '-i
Release the key as soon as the required sound level is obtained.
12