Philips CDI550 - Manual (Page 15)

PLAYING DISCS
PLAYING AN AUDIO CD I. Using the audio screen
NOTE; This procedure also can be used for audio sections on 5
inch (12 cm) laser discs.
- After loading the disc, the CD-
Audio screen appears on the TV.
l.Play track bar: shows the total
number of tracks (up to 30).
You can 'point-and-click' to
select any track. For discs with
more than 30 tracks, the right ►
and left scroll arrows are used
to move through the track list.
OPERATION SELECT
I 68.27
I
D isc time
2. PROGRAM; allows you to program a list of special tracks,
called a Favorite Track Selection. When you select PROGRAM,
the FTS track bar and the FTS icon will appear.
3. FTS: allows you to play Favorite Track Selections. This icon
only appears if a Favorite Track Selection has been created for
the disc that is loaded in the player.
4. SCAN: allows you to listen to the beginning of every track
li.sted in the play track bar. You can set the scan time to 5, 10
or 20 seconds by using the 'Options' screen.
5. SHUFFLE: allows you to play the tracks in the play track bar
in a random order.
6. REPEAT: allow'S you to repeat either one track or the entire
disc. You can change the repeat mode in the 'Options' screen.
7. TRACK/TIME window;
- after loading, and in STOP mode, this shows the total number
of tracks and the total playing time. When you click on this
window' (7), the track time of the selected track is displayed.
- in PLAY and PAUSE modes, the window show's the track number
and either the elapsed or the remaining track playing time. To
•switch betw'een elapsed and remaining time, 'point-and-click' at
the time shown in the window'.
8. All the disc play control functions are shown on the screen,
and can be selected as desired by 'pointing-and-clicking' with
your pointing device. The operation of the functions is briefly
explained in the follow'ing table.
NOTE
If auto SHUFFLE or auto FTS has been selected on the 'CD
Audio' .screen, this function will be activated automatically.
Start play play
play starts at the beginning of track 1, or any
other preselected track number. If a track is
already playing, it is restarted.
NOTE: When play starts, adjust the sound
level as required.
Select a track track number
if the disc contains more than 30 tracks, use the
left •< and right ► scroll arrows to move
through the track numbers as required.
Pause pause
interrupts the play mode.
Exit pause pause or play
play restarts at exactly the same point as that
at which pause was selected.
Forward search forward
searches forw'ard through disc, first slow'ly,
then quickly.
Reverse search reverse
searches backwards through disc, first slowly,
then quickly.
Stop play stop
use to stop playing.
Scan the disc scan
plays the beginning of each track on the disc
in turn.
Exit scan scan
normal play starts from this point.
Shuffle play shuffle
shuffle sequence appears in track bar.
Exit shuffle shuffle
normal play starts from this point.
Repeat repeat
repeats the entire disc (or FTS program), or the
track being played, as selected on the
"Options" screen.
Play FTS FTS
only available when an FTS program has
already been created for the disc in the
player.
Exit FTS FTS
normal play starts from this point.
Program FTS program
• Point to tracks as required on the play track
bar, and in each case click on any action button
to record the track in the FTS track bar.
• To cancel an unwanted track, point to it in
the FTS track bar and click on any action
button.
• To cancel the entire FTS program, point to
the first track in the FTS track bar and click on
any action button repeatedly until all the
tracks disappear.
Store FTS save FTS
the keyboard screen replaces the CD-Audio
screen. See 'CREATING FTS TITLES', p l6.
15