Philips CDI550 - Manual (Page 10)

INSTALLATION
I. CHOOSING THE RIGHT VIDEO CONNECTIONS
Most of today's TV receivers have several possible picture input
connections. In order of picture quality, these are:
- Video (CVBS).
- Antenna in.
Depending on the version of your player, it is advised that you
connect it to the TV input with the highest picture quality.
NOTE
Please refer to the instructions that come with the TV set for
selection of the correct input.
roiilf
7. DC OUT.
8. Audio R (right).
9. Audio L (left).
10. Video (CVBS).
For any optional connection accessories you require, contact
your supplier.
2. CONNECTION TO A TV WITH A VIDEO (CVBS) SOCKET
Connect the corresponding connectors with a matching video cable.
Since this cable does not connect the audio, it has to be connected
separately with a matching cable (refer to the accessories page on
the back of this manual).
iiniiBiiBimiHinBm
3. EXTERNAL RF MODULATOR CONNECTION
• Connect the Audio/Power cable and the Video (CVBS) cable
of the RF modulator unit to the corresponding connectors of
the player.
• Disconnect the input cable from the antenna at the TV and
plug it into the AOT IN socket of the RF modulator.
• Link the modulator's ANT OUT socket with the TV using the
RF cable.
• If you have a VCR (or antenna or cable) connected to the TV
antenna input and your RF modulator has an antenna input,
connect the RF modulator between the VCR (or antenna or
cable) antenna output and the TV antenna input. You may
also use an optional external switchbox, if desired.
- Your CD-I player sends pictures and sound to your TV on the
channel number indicated by the channel selector position at
the RF modulator. This signal is sent through the coaxial cable.
• To operate the player with your TV, set your TV to the same
channel.
- You can avoid local interference by selecting a different
channel with the channel selector.
Please refer to the instructions that came with the TV set for the
selection of the channel.
10