Playing a cd-i disc, Playing discs – Philips CDI550 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAYING DISCS
loading
and
unloading
Loading:
• Push on the disc cover (1) to open.
- The disc cover unlatches.
• Open the cover gently until it is in the open position (60°
approx.) where it latches.
• Take the disc and place it in the player with the label up.
• Push the disc cover (1) to close.
- The LED flashes whilst the disc is starting up and lights stable
when the disc is ready for play.
- The TV screen changes according to the type of disc.
Push on the disc cover to open.
The player start-up screen reappears on the T\L
Take the disc from the player.
Push the disc cover (1) to close.
NOTE
— Unloading a CD-I disc while the CD-I program is running, will
terminate the CD-I program abruptly. 'Bookmarks' or
intermediate results, if used by the CD-I program, might not
be updated to reflect the latest situation.
PLAYING A CD-I DISC
CAUTION
NEVER PUT MORE THAN ONE DISC AT A TIME INTO THE
CD-I PLAYER
NOTE
This procedure is the same for CD BRIDGE discs, CD-I READY
discs and PHOTO CDs. It is also the same for Digital Video discs
and Video CDs when a Digital Video Cartridge has been
installed.
2. When autoplay is "OFF":
After loading the disc, the CD-I start-up screen will appear on the
TV.
To start the CD-I program, select the 'Play' icon on the screen and
click on it.
CAUTION
NEVER LEAVE A STILL PICTURE ON THE SCREEN FOR
ANY LENGTH OF TTME. THIS CAN CAUSE BURNING-IN OF
THE PICTURE TUBE. IN SUCH A CASE, SWITCH OFF THE
PLAYER OR REMOVE THE DISC.
■ When a title consists of more than one consecutive disc, a so
called 'multi-disc' title, follow the instructions for opening and
closing the disc cover as shown on this screen.
The opening screen of the CD-I
program now appears on the TV.
From this point, all interaction is
between you and the program.
To stop at any time, select the
STOP or EXIT function provided
by the CD-I program.
Certain aspects of CD-I disc playback depend on the value of
Auto play (see settings). The factory setting is default "ON".
1. When autoplay is "ON":
After loading the disc, the CD-I program will start up
automatically.
14