Futaba GV-1 - Manual (Page 35)

FUNCTIONS
Governor ON/OFF switch operation setting
StSw If the governor is turned on and off by using the throttle
stick position, then by selecting. "INH" inhibit it willturn
off the governor at the maximum slow position. When this
function is set to the side at which on/off switching is per-
formed, when "OFF" is displayed, the governor is off and
when "ON" is displayed, the governor is on and can be op-
erated.
(Setting method)
1
Switch the mode by pressing the
DATA+ or DATA- key.
(Initial value) INH
Governor ON/OFF condition
(monitor function)
SWCd
This function displays the present governor on/off status. When the governor
can be operated, "ON" is displayed. This function checks all the conditions
for turning the governor on and off.