Futaba GV-1 - Manual (Page 23)

FUNCTIONS
Function map
rpm
Max
rSx
Disp
GRt
SWPt
StSw
SWCd
GvOf
Volt
MxMD
MD
ATV
MSx
MTrm
B/FS
B/FD
Lmt
Tst
Sen
FUNC+ key FUNC- key
(Initial screen)
Note 1
Speed display (monitor function) (P33)
MAX speed display (monitor function) (P33)
Speed setting (P34)
Speed display mode (P35)
Rotor gear ratio (P35)
Governor ON/OFF switch position setting (P36)
Governor ON/OFF stick operation setting (P37)
Governor ON/OFF condition (monitor function) (P37)
Governor OFF high point stick operation setting (P38)
Battery
voltage check
Governor
ON/OFF
functions
Speed
functions
Battery voltage display (monitor function) (P38)
Mixture servo operation mode (P39)
Mixture rate setting (P40)
Mixture
functions
Mixture ATV (P42)
Mixture servo reverse (P42)
Mixture trim (P43)
Battery fail safe (P44)
Battery
fail safe
functions Battery fail safe position (P44)
Operating
range setting
functions
Limit setting (P45)
Throttle servo operation test (P46)
Sensor check
Rotation sensor monitor (monitor function) (P46)
Note 1.
The "Limit Set" screen is displayed only when the power is turned on for the
first time after the GV-1 is purchased. Once limit setting is performed, the
"Speed display" screen becomes the initial screen.