Futaba GV-1 - Manual (Page 2)

Thank you for purchasing a Futaba GV-1 governor.
To ensure safe use, please read this manual thoroughly before
using your new governor. After reading this manual, store it in a
safe place.
FOREWORD
The GV-1 is an engine governor for model helicopters.
The governor automatically maintains constant rotor R.P.M.due
to load changes (reaction to torque) by suppressing variations in
the engine speed. The GV-1 works very well in all maneuvers,
from hovering to flying.
-Engine speed can be set from both the GV-1 and the transmitter.
-A magnetic sensing system reads the engine speed.
-Fuel mixture control can be set.
-An LCD panel displays the engine speed and set data.
-No part of this manual may be reproduced in any form without prior permission.
-The contents of this manual are subject to change without prior notice.
-This manual has been carefully written. Please contact Futaba if you feel that any cor-
rections or clarifications should be made to the contents of this manual.
-Futaba is not responsible for the results of use of this product by the customer.