Futaba 10CG 2.4GHz - Manual (Page 105)

105
HIGH/LOW PITCH (HI/LO-PIT):
7KLVIXQFWLRQPD\EHXVHGWRDGMXVWWKHFXUYHVKLJKDQGORZVLGHLQGLYLGXDOO\IRUHDFKÀLJKWFRQGLWLRQQRUPDOLGOHXS
idle-up 2, idle-up 3, throttle hold).
Adjustability:
‡
FRQWUROLVGH¿QHGDVWKHULJKWVLGHOHYHUDWLQLWLDOVHWWLQJ
• The conditions are activated in the CONDITION SELECT function (p.100).
• Both adjustments may be set to MANUAL, temporarily turning off the knob.
• Adjustments may be memorized and then return the knobs to center point to
use that amount of adjustment. Allows easy use of the trimming knobs for
multiple models.
GOAL of EXAMPLE: STEPS: INPUTS:
Set up a high pitch curve in the idle-up
1 condition.
6WRUHQHZVHWWLQJVDIWHUÀLJKW
Open the HI/LO-PIT function. for 1 second. (If BASIC, again.)
C to HI/LO-PIT.
Select the idle-up 1 condition. C to NORM. to IDL1.
Set the rate. (Ex: 80%) C to HI-PIT.
to 80%.
Optional: change which knob adjusts
high pitch curve. C to VR.
to desired knob and direction.
Store the current dial settings prior to
selecting another model. C to HI-PIT.
for one second to store.
or VR(E) to center.
Close.
Where next? PIT-CURVE : see p. 100.
HOV-PIT : see p. 104.