Futaba 8SSHP - Manual (Page 25)

Five battery pack 6V connector Motor regulated
power supply. (Insert the jumper connectors
when the power supply is shared with the receiver.)
Gyro output trimmer
Control box
(C) connector Red Jumper connector
Control amp
Gyro output
polarity switch
Connects to
receiver CH5
(Gyro output
switching)
Gyro body
Connected servo (rudder servo
for helicopter) neutral position
trimmer. (This trimmer is
operative even when the
control box power switch is set
to OFF.)
Fig. 57
6
Pitch control servo
5 .
Landing gear servo, or rate
gyro output switching
connector
4
Rudder servo (When a rate
gyro is used, this servo
connects to the receiver
through the rate gyro.)
3
Throttle servo
2
Elevator servo
8SSHP 4 servos
Aileron servo
23