Futaba 8SSHP - Manual (Page 22)

J Channel select switch
•This switch selects the channel to be set by ATV or
FS, when used in conjunction with item [1] ATV/FS
button previously described. It is also the select
switch for servo test and the switch which selects the
channel to be by switch [35] RESET.
[34] Channel select switch
Fig. 53
Relationship among channel select switch number,
servo and reset.
No.
1
2
3
4
5
6
7
8
RESET &
TEST ALL
OFF
At switch [35] FS SELECT,
ATV, TEST A.B
Aileron
Elevator
Throttle
Rudder
Channel 5 switch
Channel 6 pitch
Channel 7 knob
Channel 8 switch
All the servos are
operated at servo
test.
Usually set to this OFF position.
At switch [35]
RESET
FS (fail safe)
ATV
BFS memory
FS, ATV, and BFS
memory are reset
simultaneously.
K Function select switch
•This switch selects ATV, FS, servo test, reset, and
BFS memory setting as described at [I] ATV/FS
button.
• Normally set it to OFF.
1 FS ALL
Switch to this position when setting fail safe for all
channels, FS is described in the "HOW TO USE
FS" section.
2 FS SELECT
This position allows setting of fail safe and hold as
described in the "HOW TO USE FS" section.
3 ATV
This position allows setting ATV as described in
the "HOW TO USE ATV" section.
4 TEST A
This position allows servo test A as described in the
"SERVO TEST" section.
5 TEST B
This position allows servo test B as described in the
"SERVO TEST" section.
6 BFS MEMO SET
Switch to this position when setting the BFS re-
lease point as described in the "BATTERY FS
MEMORY SETTING" section.
7 OFF
Normally set to this position.
3 5 Function select switch
Fig. 54
20
39 Trainer cord socket
40 Trainer switch
Push on/self-off switch. The transmitter connected
by the trainer cord (M-TC) operates and when it is
OFF, your-own transmitter only operates.
Connect the transmitters with the trainer cord (M-
TC-FM, purchased separately) as shown in Fig. 55.
When the switch is in the ON (push) position, the
student's transmitter operates and when the switch
is in the OFF position, the instructor's transmitter
Operates. The transmitter at which the trainer
switch is operated on-off becomes the instructor's.
Instructor transmitter
(Power switch ON and transmitter operating)