FloAire FAV-M - Manual

Revision 10 – 11.19.2013
Installation & Operation Guide
Industrial Direct Fired Heaters
Horizontal / Vertical and Single / Twin Blowers
Re-Circulating Systems
Static Pressure Controller – Potentiometer
FOR YOUR SAFETY
If You smell gas:
1. Open windows
2. Don’t touch electrical switches
3. Extinguish any open flames
4. Immediately call your gas supplier
FOR YOUR SAFETY
The use and storage of gasoline or
other flammable vapors and liquids in
open containers in the vicinity of this
appliance is hazardous!
WARNING!!
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and
maintenance instructions thoroughly before installing or servicing this equipment.
ALWAYS disconnect power and gas prior to working on heater.
RECEIVING AND INSPECTION
Upon receiving unit, check for any interior and exterior damage, and if found,
report it immediately to the carrier. Also check that all accessory items are
accounted for and are damage free. Turn the blower wheel by hand to verify
free rotation and check the damper (if supplied) for free operation.
NOTE TO INSTALLER
Please complete and return the
Start-UP Checklist on the back of this
manual to validate warranty
NOTE TO INSTALLER
This manual should be reviewed with
the customer and left with the
equipment user