Flintec DAD 141.1 Modbus Communication - Manual (Page 9)

DAD 141.1 Technical Manual Modbus Communication, Rev. 2.3 - Juni 2014 Page 9
221E Int32 2 RW Initial Zero
@ Power ON This Index enables or disables the initial zero function @ power ON.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 221E.
see also command description:
ZI Initial Zero ON/OFF
2220 Int32 2 RW Zero Range This Index selects the zero range.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 221E.
A value of 0 enables the standard zero range of ± 2% of maximum.
see also command description:
ZR Zero Range
2224 Int32 2 RW Store Tare value
@ Power OFF This Index enables or disables the tare storing in EEPROM @ power OFF.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2224.
see also command description:
TN Store Zero Value
2226 Int32 2 RW Store Zero Value
@ Power OFF This Index enables or disables the zero storing inh EEPROM @ power OFF.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2226.
see also command description:
ZN Store Zero Value
2400 Int32 2 RW Trigger Level This Index selects the trigger level.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2400.
see also command description:
TL Trigger Level
2402 Int32 2 RW Trigger Egde This Index selects rising or falling slope trigger.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2402.
see also command description:
TE Trigger Edge
2408 Int32 2 RW Hold Time This Index Reads/Modify the Hold time of setpoint S0.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2408.
see also command description:
HT Hold Time
240A Int32 2 RW Tare Window This Index Reads/Modify the tare window.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 240A.
see also command description:
TW Tare Window
240C Int32 2 RW Tare Time This Index Reads/Modify the tare time.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 240C.
see also command description:
TI Tare Time
2410 Int32 2 RW Measuring Time This Index Reads/Modify the time over which the average value will be built.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2410.
see also command description:
MT Measure Time