Flintec DAD 141.1 Modbus Communication - Manual (Page 8)

DAD 141.1 Technical Manual Modbus Communication, Rev. 2.3 - Juni 2014 Page 8
The values of the update rate are 0 to 7 (2 exp 0 = 1, 2 exp 7 = 128).
see also command description:
UR Update Rate
2122 Int32 2 RW Zero Tracking This Index enables or disables the zero tracking (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2122.
The values of Zero Tracking function are 0 to 255.
see also command description:
ZT Zero Tracking
2128 Int32 2 RW Analog Output
Mode This Index is used for set the analog output mode.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2128.
The values of the output mode are 0 to 5
see also command description:
AM Analog Output Mode
2200 Int32 2 RW Absolute Gain
Calibration This Index Reads/Modify the absolute gain point (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2200.
see also command description:
AG Absolute Gain
2202 Int32 2 RW Absolute Zero
Calibration This Index Reads/Modify the absolute zero point (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2202.
see also command description:
AZ Absolute Zero
2204 Int32 2 RW Calibrate Enable This Index sets the calibration functions to the enabled state.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2204.
see also command description:
CE Calibrate Enable
2206 Int32 2 RW Calibrate Gain This Index sets the calibration gain (span) value (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2206.
see also command description:
CG Calibrate Gain
220C Int32 2 RW Calibrate Max This Index Reads/Modify the maximum allowable output value (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 220C.
see also command description:
CM Maximum Output
220E Int32 2 RW Calibrate Min This Index Reads/Modify the minimum allowable output value (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 220E.
see also command description:
CI Minimum Output
2212 Int32 2 W Calibrate Zero This Index sets the calibration zero point (TAC protected).
The 32 bit integer data accessed by writing 2 16-bit registers from index 2212.
see also command description:
CZ Calibrate Zero
2214 Int32 2 RW Decimal Point This Index Reads/Modify the decimal point position (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2214.
see also command description:
DP Decimal Point
Index (hex) Type Size Access Function Description
2216 Int32 2 RW Display Step
Size This Index Reads/Modify the the display step size (TAC protected).
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2216.
see also command description:
DS Display Step Size