Flintec DAD 141.1 Modbus Communication - Manual (Page 6)

DAD 141.1 Technical Manual Modbus Communication, Rev. 2.3 - Juni 2014 Page 6
Index (hex) Type Size Access Function Description
2074 Int16 1 RW Logic Input
Select This Index is used to get or set Logic Input Function in a DAD141.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2074.
The values of the function are 0 or 1.
see also command description:
AI’n‘, ‘m‘ (n = 0 or 1) Assign Input.
2076 Int16 1 RW Assign Logic
Input This Index is used to get or set Logic Input Function in a DAD141.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2074.
The values of the function are 00 to 15.
see also command description:
AI’n‘, ‘m‘ (m = 0 … 15) Assign Input
2080 Float 2 R Peak Value This Index returns the latest peak value obtained from a DAD141.
The format is IEEE754 Single precision floating point format. The 32 bit data is obtained by reading 2
16-bit registers from index 2080. See also command description:
GM Get Peak Value
2082 Int32 2 R Peak Value This Index returns the peak value of the DAD141.
The 32 bit integer data is obtained by reading 2 16-bit registers from index 2082.
see also command description:
GM Get Peak Value
2084 Float 2 R Hold This Index returns the latest hold value obtained from a DAD141.
The format is IEEE754 Single precision floating point format. The 32 bit data is obtained by reading 2
16-bit registers from index 2084. See also command description:
GH Get Hold Value
2086 Int32 2 R Hold This Index returns the hold value of the DAD141.
The 32 bit integer data is obtained by reading 2 16-bit registers from index 2086.
see also command description:
GH Get Hold Value
2088 Float 2 R Valley Value This Index returns the latest valley value obtained from a DAD141.
The format is IEEE754 Single precision floating point format. The 32 bit data is obtained by reading 2
16-bit registers from index 2088. See also command description:
GV Get Valley Value
208A Int32 2 R Valley Value This Index returns the valley value of the DAD141.
The 32 bit integer data is obtained by reading 2 16-bit registers from index 208A.
see also command description:
GV Get Valley Value
208C Float 2 R Peak to Peak
Value This Index returns the latest valley value obtained from a DAD141.
The format is IEEE754 Single precision floating point format. The 32 bit data is obtained by reading 2
16-bit registers from index 208C. See also command description:
GO Get Peak Value
208E Int32 2 R Peak to Peak
Value This Index returns the peak value of the DAD141.
The 32 bit integer data is obtained by reading 2 16-bit registers from index 208E.
see also command description:
GO Get Peak Value
2100 Int32 2 RW Analog Action This Index is used to select Analog Output Source.
The 32 bit integer data accessed by reading or writing 2 16-bit registers from index 2100.
The values of the analog action are 0 to 8.
see also command description:
AA Analog output source
Index (hex) Type Size Access Function Description