Canon BJC-80 - Manual (Page 77)

Using the Printer With the Battery Pack
To print using the battery pack, you must disconnect the AC adapter from the
battery case. If the AC adapter is connected, the printer will not print.
1
Connect the printer
to the computer.
Open the interface cover and connect the parallel cable.
Align the cable connector with the printer’s interface port so the shapes match.
Lift the back of the battery case and printer if necessary.
Gently press the cable connector into the port.
Secure the cable connector by snapping the two wire clips (located on the printer) into the
cable connector.
2
1 of 2 4/24/98 3:14 PM