Clarion VRX653R - Manual (Page 38)

40
VRX653R
English
Owner
’s manual
Other Functions
Setting the car speaker output for
the cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular
phone interrupt to ON.
1. Press the ADJ button * to switch to the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to select “TEL SP”. “LEFT” and
“RIGHT” are displayed in the menu bar.
● LEFT:
Telephone calls can be heard on the left
speaker connected to this unit.
● RIGHT:
Telephone calls can be heard on the right
speaker connected to this unit.
3. Operate the JOYSTICK ¡ rightward or
leftward to select a desired mode, and then
press the ENT at the center of the
JOYSTICK ¡ to set it.
4. Press the ADJ button * again to return to
the STANDARD display.
3. Press the TITLE button ( again to return to
the STANDARD display.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
1. Press the ADJ button * to switch to the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to select out of “TEL SW”, “ON”,
“OFF”, and “MUTE”, which are displayed in
the menu bar.
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When the setting is OFF, disconnect the
cellular phone from the cable or turn off the
power of the cellular phone.
● ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
operating the VOLUME button 2.
● MUTE:
The sound from this unit is muted during
telephone calls.
3. Operate the JOYSTICK ¡ rightward or
leftward to select a desired mode, and then
press the ENT at center of the JOYSTICK
¡ to set it.
4. Press the ADJ button * again to return to
the STANDARD display.