Remote control, Inserting the battery, English – Clarion VRX653R User Manual
Page 10

12
VRX653R
English
Owner
’s manual
6. REMOTE CONTROL
When the panel is open
CR202
5
[FNC]
[BND]
[ ]
[ ], [ ]
[MUTE]
[TA]
[PS/AS]
[a], [d]
[DISP]
[PTY]
[AF]
Inserting the Battery
1 Turn over the remote control unit and slide the cover in the
direction indicated by the arrow in the illustration.
2 Insert the battery (CR2025) into the insertion guides, with
the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the arrow so
that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
Notes:
Misuse may result in rupture of the battery, producing leakage
of fluid and resulting in personal injury or damage to
surrounding materials. Always follow these safety precautions:
• Use only the designated battery .
• When replacing the battery, insert properly, with +/– polarities
oriented correctly.
• Do not subject battery to heat, or dispose of in fire or water.
Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
Insertion guide
Signal transmitter
Operating range: 30
° in all directions