Emerson Radio GP755 User Manual

Page 9

OPERATION

PLACING A CALL

Lift the handset and listen for a dial tone.

Press the Key buttons (0-9) to dial the
phone number you wish to call.

RECEIVING A CALL

Up to 64 incoming calls are saved in the Caller ID log.

Make sure that the Caller ID service is turned on by your phone company. When
you receive a call, the display will show the name of the caller, number, time and
date of the call. The NEW icon will appear in the display and the NEW CALL
indicator will blink. To answer the call, simply remove the handset from the base.
To end a call, simply return the handset to the base.

NOTES:
• The Ringer Indicators will light when an incoming call is received. The visual

ring signal will operate even if the ringer is set to the OFF position.

• If a call is received from an area which does not provide Caller ID service, the

display will show “UNAVAILABLE”.

• If a call is received from a caller that has blocked his/her information, the display

will show “PRIVATE CALL”.

• If you subscribe to Caller ID, the time and date are automatically set when the

first call is received.

• Calls picked up on the first ring will not be logged in the Caller ID log.
• If there are new calls, the NEW icon will appear in the display and the NEW

CALL indicator will blink.

• If a call was received incorrectly or only part of the data was received, the

display will show “LINE ERROR”.

GP755.O/M.v5.QXD 7/7/03 10:46 AM Page 9