Emerson Radio GP755 - Manual (Page 15)

15
OPERATION (CONTINUED)
WHEN THE CALLER’S PHONE
NUMBER HAS A DIFFERENT
AREA CODE FROM THE PRESET
In this case, the long distance dialing
digit, “1”, will be inserted automatically
before the number is dialed.
Press the CALL BACK button and the
11 digit number will blink. Press the
CALL BACK button again to confirm
the 11 digit number.
1
WHEN THE CALLER’S PHONE
NUMBER HAS THE SAME AREA
CODE FROM THE PRESET
In this case, the long distance dialing
digit, “1”, and the area code will be
deleted automatically before the
number is dialed.
Press the CALL BACK button and 7
digit number will blink. Press the CALL
BACK button again to confirm the 7
digit number.
1
NOTE: Your telephone company may require a different format for making out-of-
area (toll) calls within your area code. See the next section for procedure to obtain
the applicable toll call format for your phone company:
When your phone company requires you to dial other than a 7 digit number
(same area code) or 11 digit number (different area code) to make toll calls
within your area code, follow one of the four options as follows:
OPTION 1: 1 + AREA CODE + 7 DIGIT NUMBER (11 DIGITS)
OPTION 2: 1 + 7 DIGIT NUMBER (8 DIGITS)
OPTION 3: AREA CODE + 7 DIGIT NUMBER (10 DIGITS)
OPTION 4: 7 DIGIT NUMBER (7 DIGITS)
Press the ▼ ❶ or ▲ ❷ button to locate
a caller ID call to be dialed. Press the
CALL BACK
❸ button and the 7 digit
or 11 digit number will blink.
3
2
1
1
Press the ▼ ❶ or ▲ ❷ button to cycle
through the options as shown above.
When the desired option appears,
press the CALL BACK button
❸ again
to dial.
3
2
1
2
GP755.O/M.v5.QXD 7/7/03 10:46 AM Page 15