Emerson Radio GP755 - Manual (Page 13)

13
OPERATION (CONTINUED)
VIEWING THE CALLER ID MEMORY
To view the new calls (NEW CALL
indicator will be lit), press the
▼ ❶ or
▲ ❷ button. As they are checked, the
CALL # will decrease.
1
2
1
When all new calls have been checked,
“END OF
NEW CALL” will appear in
the display. Press the ▼ ❶ button to
view the oldest calls or the ▲ ❷ button
to view the most recent calls.
1
2
2
ERASING THE CALLER ID MEMORY
To erase a single call, press the ▼ ❶
or ▲ ❷ button to select the call to
delete, then press the ERASE button
❸ twice quickly. The information for
that call will be erased and the CALL #
and Caller ID data will be updated.
3
2
1
1
ALL NEW CALLS MUST BE REVIEWED
BEFORE ERASING CALLER ID
MEMORY. To erase all calls in Caller ID
memory, press and hold the ERASE button
for three seconds. The message “ERASE
ALL CALLS” will appear in the display.
Press the ERASE button again to confirm.
All Caller ID information will be deleted and
“NO CALLS” will appear in the display.
2
NOTES:
• After all calls are viewed, “END OF LIST” will appear in the display.
• The NEW CALL indicator will blink until all new Caller ID information has been
reviewed.
• The RPT icon will appear in the display if you have received multiple new calls from
the same number.
• If you receive a call from a number previously viewed in the Caller ID memory, the
data in memory will be replaced with the new call’s time and date, and the NEW icon
will light in the display.
• If no key is pressed within 20 seconds, the display will show the “ANSWER-READY”
mode and show the total call counter, new call counter, current time and date.
GP755.O/M.v5.QXD 7/7/03 10:46 AM Page 13