Emerson Radio GP755 - Manual (Page 16)

16
TROUBLESHOOTING GUIDE
SYMPTOM
No Dial Tone.
Phone does not
ring.
Voice level too low.
Unit will not
memory dial.
Unit will not dial
out.
Caller ID not
working.
POSSIBLE
CAUSE
Line cord not connected
correctly.
Ringer switch set to
OFF position.
Line cord not connected
correctly.
Wall jack not working.
NORM/HIGH switch set
to NORM position.
Memory locations not
set properly.
Loss of power/memory.
TONE/PULSE switch
not set properly.
Loss of Power.
You are not subscribed
to Caller ID service.
POSSIBLE
SOLUTION
Connect line cord
correctly.
Slide Ringer switch to
the HI or LO position.
Connect line cord
correctly.
Try phone in another
wall jack.
Set NORM/HIGH
switch to HIGH position.
Reprogram memory
location numbers as
per this manual.
Check batteries or AC.
Reprogram memories.
Set TONE/PULSE
switch properly.
Check batteries or AC.
Call your local phone
company to subscribe.
GP755.O/M.v5.QXD 7/7/03 10:46 AM Page 16