EcoTech Marine XR15 Radion - Manual (Page 4)

Basic Mode
Increase
relative
light
intensity
Decrease
relative
light
intensity
Cycle color
and
temperature
Your Radion operates in Basic Mode out of the box. In Basic
mode, the Radion will remain on unless manually powered off.
Current settings will remain even after powering off.
In Basic Mode, be sure to use an outlet timer (not included) to
schedule the light to turn on and off at the appropriate times.
See page 8 for an explanation of EcoSmart Live
button controls.
RADION CONTROLS
5 4
1.
If you already have a ReefLink and EcoSmart Live account, simply power on your Radion and add the new light
through EcoSmart Live.
Refer to the ReefLink quick start guide and the support section of our website for more information
regarding the operation of your ReefLink.
Setting Up a Radion with ReefLink*
If you do not have a ReefLink, proceed with EcoSmart Live setup via USB on page 6.
2.
If you just purchased a ReefLink and Radion light(s), set up the ReefLink first. After the ReefLink setup is complete
run the New Aquarium setup wizard through EcoSmart Live to set up your new lights (Settings > Aquarium Setup).
*XR15FW (Fresh Water) fixtures require an optional RF module to connect to ReefLink. RF Modules are
available at www.ecotechmarine.com