Ecler CA‐NET RS‐232 - Manual (Page 25)

CA‐NET Protocol
page 25 / 29
specified output zone
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPCIÓN
DATA INFO_MODEL Shows the Device model name
INFO_VERSION Shows the current Firmware Version
AUTOLOAD_PRESET1 ON/OFF Shows the current AUTOLOAD_PRESET1 at Startup function
PRESET_NUMBER Shows the current PRESET number (active preset)
PRESET_NAME “” Shows a certain PRESET (from P1 to P10) or TEMPLATE (from T1 to
T6) name
PRESET_DONE Shows that the last SET LOAD_PRESET or SET PRESET_NUMBER
command has been processed: the preset is loaded and active
REMOTE_MODE Shows the working mode for a certain REMOTE port (from R1 to
R4)
REMOTE_INPUTS Shows the list of inputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
REMOTE_ZONES Shows the list of outputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
DISPLAY_MODE Shows the current DISPLAY MODE
LCD_CONTRAST Shows the current DISPLAY CONTRAST level
EXT_MUTE_ZONES Shows the list of outputs to be muted by an external contact
closure, connected to the MUTE port
IN_LABEL “” Shows the current LABEL (name) for the specified INPUT
IN_STEREO ON/OFF Shows the current STEREO link status (ON or OFF) for INPUTs 4 and
5
IN_MUTE ON/OFF Shows the current MUTE status (ON or OFF) for the specified
INPUT
IN_VOL Shows the current VOLUME for the specified INPUT (general input
volume, affecting all the post processing)
IN_BASS Shows the current BASS tone LEVEL for the specified INPUT
IN_MID Shows the current MIDDLE tone LEVEL for the specified INPUT
IN_TREBLE Shows the current TREBLE tone LEVEL for the specified INPUT