Ecler CA‐NET - Manual (Page 25)

CA‐NET Protocol
page 25 / 33
XSELECT Gets the current CROSSPOINT SELECT status (ON (input active) or OFF
(input muted)) for the specified INPUT at the specified output zone
XLEVEL Gets the current CROSSPOINT LEVEL (mix level) for the specified INPUT
at the specified output zone
ZONE_LABEL Gets the current LABEL (name) for the specified output zone
ZONE_STEREO Gets the current STEREO link status (ON or OFF) the specified output
zone
ZONE_MUTE Gets the current MUTE status (ON or OFF) for the specified output
zone
ZONE_VOL Gets the current VOLUME for the specified output zone
GEQ_ACTIVE Gets the current GRAPHICAL EQUALIZER status (ON or OFF) for the
specified output zone
GEQ_GAIN Gets the current GAIN (dBx10) of one BAND (B1 to B10) of the
GRAPHICAL EQUALIZER for the specified output zone
XOVER_ACTIVE Gets the current CROSSOVER FILTER status (ON or OFF) for the
specified output zone
XOVER_TYPE Gets the current CROSSOVER FILTER TYPE (LP or HP) for the specified
output zone
XOVER_FREQUENCY Gets the current CROSSOVER FILTER FREQUENCY (Hz) for the specified
output zone