Ecler CA‐NET - Manual (Page 23)

CA‐NET Protocol
page 23 / 33
DAM514
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPCIÓN
GET ALL Dumps current device status (with DATA messages)
INFO_MODEL Gets the Device model name
INFO_VERSION Gets the current Firmware Version
AUTOLOAD_PRESET1 Gets the current AUTOLOAD_PRESET1 at Startup function
PRESET_NUMBER Gets the current PRESET number
PRESET_NAME Gets a certain PRESET (from P1 to P10) or TEMPLATE (from T1 to T6)
name
REMOTE_MODE Gets the working mode for a certain REMOTE port (from R1 to R4)
REMOTE_INPUTS Gets the list of inputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
REMOTE_ZONES Gets the list of outputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
DISPLAY_MODE Gets the current LCD DISPLAY MODE
LCD_CONTRAST Gets the current LCD DISPLAY CONTRAST level
EXT_MUTE_ZONES Gets the outputs to be muted by an external contact closure,
connected to the MUTE port
IN_LABEL Gets the current LABEL (name) for the specified INPUT
IN_STEREO Gets the current STEREO link status (ON or OFF) for INPUTs 4 and 5
IN_MUTE Gets the current MUTE status (ON or OFF) for the specified INPUT
IN_VOL Gets the current VOLUME for the specified INPUT (general input
volume, affecting all the post processing)
IN_BASS Gets the current BASS tone LEVEL for the specified INPUT
IN_MID Gets the current MIDDLE tone LEVEL for the specified INPUT
IN_TREBLE Gets the current TREBLE tone LEVEL for the specified INPUT
HPF_ACTIVE Gets the current HIGH PASS FILTER status (ON or OFF) for the specified
INPUT
HPF_FREQUENCY Gets the current HIGH PASS FILTER frequency (Hz) for the specified
INPUT
FBS_ACTIVE Gets the current FEEDBACK SUPPRESSOR feature status (ON or OFF)
for the specified INPUT