Ecler CA‐NET - Manual (Page 24)

CA‐NET Protocol
page 24 / 33
GATE_ACTIVE Gets the current NOISE GATE status (ON or OFF) for the specified
INPUT
GATE_THRESHOLD Gets the current NOISE GATE THRESHOLD LEVEL (dBx10) for the
specified INPUT
GATE_DEPTH Gets the current NOISE GATE DEPTH (attenuation when gate is closed,
dBx10) for the specified INPUT
GATE_ATTACK Gets the current NOISE GATE ATTACK TIME (milliseconds x10) for the
specified INPUT
GATE_HOLD Gets the current NOISE GATE HOLD TIME (milliseconds x10) for the
specified INPUT
GATE_RELEASE Gets the current NOISE GATE RELEASE TIME (milliseconds x10) for the
specified INPUT
TALKOVER_ACTIVE Gets the current TALKOVER status (ON or OFF) for the specified INPUT
TALKOVER_MODE Gets the TALKOVER function working mode (PAGER or DUCKER) for the
specified INPUT
TALKOVER_PRIORITY Gets the current TALKOVER PRIORITY level (LOW or HIGH) for the
specified INPUT
TALKOVER_ZONES Gets the current TALKOVER assignment to outputs (ZONES) for the
specified INPUT
TALKOVER_THRESHOLD Gets the current TALKOVER THRESHOLD LEVEL (dBx10) for the
specified INPUT
TALKOVER_DEPTH Gets the current TALKOVER DEPTH (attenuation, dBx10) for the
specified INPUT
TALKOVER_ATTACK Gets the current TALKOVER ATTACK TIME (milliseconds x10) for the
specified INPUT
TALKOVER_HOLD Gets the current TALKOVER HOLD TIME (milliseconds x10) for the
specified INPUT
TALKOVER_RELEASE Gets the current TALKOVER RELEASE TIME (milliseconds x10) for the
specified INPUT
CHIME_MELODY Gets the current CHIME MELODY selected for the TALKOVER function
in PAGER mode
CHIME_VOL Gets the current CHIME MELODY VOLUME (dBx10) adjusted for the
TALKOVER function in PAGER mode