Dynaflite DYFA2018 - Manual (Page 3)

flight instructors are available. Contact the AMA
at the address or toll-free phone number below:
Academy of Model
Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(800) 435-9262
Fax (765) 741-0057
Internet address:
http://www.modelaircraft.org
parts are missing, broken or defective, or
if you have any questions about building
or flying this model, please call us at
(217) 398-8970 and we'll be glad to help.
If you are calling for replacement parts,
please look up the part numbers and have
them ready when calling.
You may also e-mail us at:
productsupport@dynaflite. corn
1.You must assemble the sailplane according to
the instructions. Do not alter or modify the
model, as doing so may result in an unsafe or
unflyable model. In a few cases the instructions
may differ slightly from the photos or plan. In
those instances the text should be taken as
correct.
2.You must take time to build straight, true and strong.
3. You must install all R/C and other components
so that the model operates properly on the
ground and in the air.
4. You must test the operation of the model
before the first and each successive flight to
insure that all equipment operates correctly.
You must also make certain that the model has
remained structurally sound, especially after a
rough landing.
REQUIRED ITEMS
These are the items not included with your
kit-you will need to purchase them separately.
Items in parentheses such as (GPMQ4243) are
suggested part numbers recognized by distributors
and hobby shops and are listed for your
ordering convenience. GPM is the Great Planes®
brand, TOP is the Top Flite® brand, HCA is the
Hobbico® brand and DYN is the Dynaflite brand.
2 - 4 Channel Radio with two standard servos
Top Flite MonoKote® (approximately 2 rolls)
1/4" Latex Foam Rubber Padding (HCAQ1050)
Switch and Charge Jack (GPMM1000)
2 Meter Up-Start (DYNP8305) or Standard
Hi-Start(DYNP8301)
Note: We, as the kit manufacturer, provide you
with a quality kit and great instructions, but
ultimately the quality and flyability of your
finished model depends on how you assembled it;
therefore, we cannot in any way guarantee the
performance of your completed model and no
representations are expressed or implied as to the
performance or safety of your completed model.
SUGGESTED BUILDING
SUPPLIES
We recommend Great Planes Pro CA and
Epoxy glue.
Please inventory and inspect all parts
carefully before starting to build. If any
2 oz. Pro CA (thin, GPMR6003)
2 oz. Pro CA+ (medium, GPMR6009)
3