Citizen Systems CBM-231 - Manual (Page 17)

CBM-230/231 User’s Manual
12 CITIZEN
4.4 Operation Panel
1. POWER LED(green)
Illuminated when the power is supplied.
2. ERROR LED(red)
Indicates different errors, depending on the illuminated or blinking condition.
Eroor Display pattern Resetting Method
Printer cover open Illuminated Close the cover
Head Up Illuminated Move down the head
Memory check Disabled
Head overheat
Automatically reset by
temperature drop
Macro execution wait Press the LF switch
Cutter motor lock
Eliminate paper jam
and press LF switch
3. PAPER LED(red)
Near end enabled : Illuminated when the paper is near its end (Stops after printing the set length)
Near end disabled : Illuminated when the paper is at its end (Stops printing)
[Caution] Use the DIP switch to enable or disable the near end detecting function.
4. LF switch
Pressing this switch for a short time feeds the paper by one line. Holding it down feeds the paper
continuously. In case of macro execution wait, pressing the LF switch executes it.
[Caution] Depending on a selection of the DIP switch, the paper can be fed when the cover is opened.