D.A.S. Audio LX-218R User Manual

Page 9

SYSTEM DESCRIPTION

LINE DRAWINGS

(rigging),

and

æro series

aero

LX-218

LX-218R

DSP-4080

æro series

DSP-4080

aero 50

LX-218

LX-218R

aero

aero 50

PL-50

LX-218R

PL-LX218

PL-218S,

LX-218

PL-218S

KITW-100

The D.A.S. Audio

offers units for

applications requiring precise control of the vertical
coverage and high sound pressure levels. The

is an externally powered, three-way, high

efficiency line array module which integrates two
15” low frequency units with 4” voice coils, four 8”
mid-range devices which utilize 2.5” voice coils
and two compression drivers with 3” coils and 1.5”
exit geometry in a single unit. The compression
drivers are coupled to two Serpis high frequency
plane

wave

adaptors

insuring

coherent

high

frequency summing and the generation of a flat,
isophasic wave front. When increased sound
pressure level in the low frequency range is
required, the system can be used in conjunction
with the

(stacking) or the

subwoofer units.

These systems are ideal for applications such

as large-scale outdoor/indoor events in arenas,
stadiums or theaters. Use of the

digital

processor is recommended for the
systems

digital processor

with the

will adversely affect the sound

quality and may damage system components.

The loudspeakers used in the system feature

advanced technologies; new TAF (total air flow)
cooling systems, Neodymium magnetic circuits
which allow for important weight reductions,
titanium

diaphragms

for

the

high

frequency

sections,

and

low-mid

frequency

cones

manufactured using crossed fibers and elastic
suspension that provide exceptional stability in the
vertical plane.

The model

includes two

, 15”

cone transducer with 4” EFW voice coils and
Neodymium magnet assemblies in a bass-reflex
configuration.

aero 50

15GNR

. Not using the

These units are manufactured using 15/18 mm

Finnish Birch plywood. The

enclosure

shape is trapezoidal with 5º angles. The

enclosures are rectangular. The

system incorporates captive rigging hardware

which

compatible

with

one

another

and

designed to provide a fast, simple and safe rigging
by means of quick release safety pins. Splay
angles can be changed from 0º to 3.2º in 0.8º
increments

and

from

3.2º

9.6º

1.6º

increments.

To facilitate transport, the

units are

equipped with a

front dolly panel attached

by means of the rigging hardware. The front dolly
panel is useful when rigging systems. The
units can be moved by way of the

front

dolly panel attached by means of the rigging
hardware or by way of the

a dolly for

vertically stacking (up to 3 units). The

units

can be moved by way of the

. Also an

accessory,

(caster kit), is available.

Four

, 8” speakers arranged on a V shape,

incorporating 2.5” EFW voice coils, Neodymium
magnet assemblies and TAF cooling system are
used for mid-range reproduction. High frequencies
are

handled

two

high

frequency

compression drivers with 3” EFW coil, Neodymium
magnet and 1.5” exit coupled to twin

plane

wave guide, designed by DAS Audio.

The

plane wave adaptor also serves as

a heat sink for the compression driver.

8MN

M-75N

serpis

aero 50

ALL DIMENSIONS IN MILIMETERS

1350

592

475

627

LX-218

ALL DIMENSIONS IN MILIMETERS

1280

550

650

LX-218R

ALL DIMENSIONS IN MILIMETERS

1350

685

550

SOUND PRODUCTS

WARNING! DO NOT SUSPEND FROM THIS HANDLE

¡ATENCIÓN! NO CUELGUE LA CAJA DE ESTE ASA

SOUND PRODUCTS

WARNING! DO NOT SUSPEND FROM THIS HANDLE

¡ATENCIÓN! NO CUELGUE LA CAJA DE ESTE ASA

Manual del Usuario

/ aero 50, LX-218 LX-218R /

User’s Manual

This manual is related to the following products:

LX-218