D.A.S. Audio LX-218R - Manual (Page 16)

When the rear of the enclosures come together, the G2A48 rear guides should be positioned (4) into the
hardware of the box above, inserting (5) the safety pins in the correct angle position. Since the boxes are
flown, the safety pins should be in the slot of the G2A48 guide.
As the array assembly is lifted (6 & 7), the platforms should be removed. PL-50
The complete assembly should begin being lifted from the hoist (3) so that the rear of the enclosures
come together due to their trapezoidal shape. The hoist will be used only to take up slack in the chain, all the
weight should be on the hoist. Proceed in this manner until the wheels of the last enclosure are off the
ground. From here on, the array can now be lifted with the hoist.
10
3
4
5
Manual del Usuario / aero 50, LX-218 LX-218R / & User’s Manual