D.A.S. Audio LX-218R - Manual (Page 11)

To aid the setting of the G2A48 guide in the
corresponding hole in the top box, each hole is
labeled with an associated angle, both for stacked
and flown applications. To fit the guides into the
holes, highly resistant 8 mm quick release pins
with a ball safety lock are used.
5
G2A48
G1A50
QUICK RELEASE PIN 8X30
(6 UNITS PER BOX)
4.8º
6.4º
8º
9.6º
3.2º
1.6º
0º
0.8º
STACK
4.8º
6.4º
8º
9.6º
3.2º
1.6º
0º
0.8º
2.4º
FLY
4.8º
6.4º
8º
9.6º
3.2º
1.6º
0º 0.8º
STACK
4.8º
6.4º
8º
9.6º
3.2º
1.6º
0º 0.8º
2.4º
FLY
For flying boxes and defining the splay angle,
the pins must be inserted in the slot of G2A48,
whereas for stacking (stacked), the pin goes
through the top hole of the guide.
All of the elements needed to rig or stack the
systems are integral to the enclosure (
and the quick release safety pins). The
additional items needed are the rigging
structure (bumper bar), chains and hoists, the
dolly platforms and the rigging
adapter.
AX-AERO50
PL-
50 AX-COMBO12
G1A50,
G2A48
APILAR
(STACK) COLGAR
(FLY)
B) Chain hoists
All units in a column will be flown from the
rigging structure (bumper bar), which
should be used with one hoist. The hoist should
have an adequate load capacity. In case of flying
12 units or more, two hoists and two pick up bars
will be needed.
AX-
AERO50
A) AX-AERO50
The rigging structure is made up of
a central pick-up bar made of steel and two
dismountable lateral panels that are attached to
the pick-up bar by way of steel safety pins. There
is an intermediate reinforcement which is used to
attach the lifting cables. The position of the safety
pins will determine the angle of the array (see the
positions marked on the AX-AERO50).
The structure will be attached to the first enclosure
of the array by means of the guides G1A50,
G2A48, and six quick release safety pins.
AX-AERO50
C) Platform PL-50
The dolly panels facilitate transport of the
systems. They can also be used to
facilitate flying the systems. Each cover is attached
to the enclosure by using the flying hardware
attached to each box and is fixed with the quick
release safety pins.
PL-50
aero 50
Weight: 51 kg {112.2 lb}
Dimensions (Al x An x Pr): 342 x 1440 x 721 (mm.)
{H x W x D: 13.5” x 56.7” x 28.4”}
WLL: 1700 kgf
Manual del Usuario / aero 50, LX-218 LX-218R / & User’s Manual