D.A.S. Audio SM Series - Manual (Page 15)

EN
5
Equalization
Low mains voltage
Connections
Power Link: Max 4 units
SML-12A
LINE
SIGNAL
INPUT
SATELLITE
OUTPUT
100 Hz
Side changing of the amplifier
is provided with the high frequency
driver on the right side. When used as a floor
monitor, and when the high frequency driver is
needed on the left side, the amplifier must swap
places with the metal plate attached to the other
flat side of the box.
SML-12A
Firstly unscrew the metal plate and the
amplifier (20 M4x20 DIN 7985). Then unplug the
white speaker connector and finally swap places.
All of the models in the
feature signal output connectors (XLR) and current
output connectors (PowerCon) in order to allow
linking both signal and mains power. Due to the
PowerCon current limit, only a maximum of 4 units
can be linked together.
stage monitors series
units have been thought of
to be used as full range systems not requiring any
additional signal processing. Being
a versatile
multipurpose cabinets they can be used in
combination with subwoofer units such as
. It is recommended to plug the mixer into the
input and then to connect the
high pass filtered output (SATELLITE
OUTPUT) to the input. That way the signal
being fed into the will be high pass filtered at
100 Hz (dotted graph in the picture).
stage monitors series
SML
sub-
18HA
sub-18HA's
sub-
18HA
SML's
SML
If mains voltage falls below the shutdown
voltage for the unit, it will stop playing. When
acceptable levels are regained, the unit will switch
back on automatically.
The units do not need extreme settings of
equalisation to produce quality sound. Avoid high
levels of gain on the equalisers. Gain values above
+6 dB on a console's EQ are not recommended.
Manual del Usuario / stage monitors / User’s Manual