Crosman BM15PR - Manual

BUSHMASTER
ModEl BM15PR
AiRSofT GUn
6MM PlASTic BB
oWnER’S MAnUAl
Distributed by
Crosman Corporation
7629 Routes 5 & 20
Bloomfield, NY 14469
www.crosman.com
1-800-724-7486 BM15PRA515
This product contains a chemical known to the
state of California to cause cancer and birth defects (and other repro-
ductive harms).
WARNING:
This is not a toy. Adult supervision is required.
Misuse may cause serious injury, especially to the eye. Eye protection
designed for airsoft guns must be worn by the user and any person
in range. May be dangerous up to 100 yds. Read the owner’s manual
before using.
WARNING:
Do not brandish or display this airsoft gun in public
– it may confuse people and may be a crime. Police and others may
think it is a firearm. Do not change the coloration and markings to make
it look more like a firearm. That is dangerous and may be a crime. READ
ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE US-
ING THIS AIRSOFT GUN.
WARNING:
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS
AIRSOFT GUN.
Recommend 18 years or older to purchase. Intended for use by those 16 or older.
Please read this owner’s manual completely. And remember, this airsoft gun is not a toy. Treat it with
the same respect you would a firearm. Always carefully follow the safety instructions found in this
owner’s manual and keep this manual in a safe place for future use.For questions regarding this
airsoft gun, contact Crosman at 1-800-724-7486, 585-657-6161 or www.crosman.com.
noTE : Charge the battery 7-8 hours prior to initial use. This airsoft gun will not operate properly
without a fully charged battery. DO NOT OVERCHARGE THE BATTERY. UNPLUG THE BATTERY
CHARGER WHEN NOT IN USE.
1. lEARninG THE PARTS of THE nEW AiRSofT GUn
Learning the parts of the airsoft gun will help in understanding the owner’s manual. (Fig.1)
A. Muzzle B. Accessory Rail c. Charging Handle d. Retractable Stock
E. Battery Compartment Door f. Safety (Fig. 2) G. Grip H. Trigger i. Trigger Guard
J. 300 Round Magazine K. Magazine release button (Fig. 4)
2. oPERATinG THE SAfETY
A. To PUT THE AiRSofT GUn “on SAfE”
• Locate the safety on the left side of the airsoft gun.
• Turn the safety lever to “SAFE” for “ON SAFE. (Fig. 2A). The safety is not “ON SAFE” unless it is
pointing to “SAFE”.
• Keep the airsoft gun in the “ON SAFE” position until you are actually ready to shoot.
Like all mechanical devices, an airsoft gun safety can fail. Even when the safety is “ON SAFE”, you
should continue to handle the airsoft gun safely. NEVER point the Airsoft gun at any person. NEVER
point the airsoft gun at anything you do not intend to shoot.
B. To TAKE THE AiRSofT GUn “off SAfE”
noTE : This airsoft gun fires in semi or full auto-mode. Full auto means it will continue to fire plastic
BBs as long as you hold the trigger. Semi- auto means you will have to pull the trigger each time
you want to fire a shot.
• Locate the safety on the left side of the receiver. (Fig. 2a)
• Turn the lever to “SEMI” for semi-auto mode. (Fig. 2b)
• Turn the lever to “AUTO” for full auto mode. (Fig. 2c)
• The airsoft gun is “OFF SAFE” and ready to fire when pointing to either “semi” or “auto.”
3. cHARGinG, loAdinG And REMoVinG THE BATTERY
A. cHARGinG THE BATTERY
noTE: The battery charging time is 7-8 hours prior to initial use. To prolong battery life and maintain
the best shooting performance rest the gun for 5-10 minutes after firing about 500 rounds. For
optimum performance completely use up the battery before recharging. DO NOT OVERCHARGE THE
BATTERY. UNPLUG THE BATTERY CHARGER WHEN NOT IN USE.
B. loAdinG THE BATTERY
• Make sure the airsoft gun is “ON SAFE” (section 2A) and is UNLOADED.
• Point the airsoft gun in a SAFE DIRECTION.
• Open the battery compartment door by pushing down on the latch and pulling the door open (Fig. 3).
• Pull out the battery connector and plug the battery in.
• Insert the wires and battery into the stock.
• Close the battery compartment door, being sure not to pinch any wires.
c. REMoVinG THE BATTERY
• Make sure the airsoft gun is “ON SAFE” (section 2A) and is UNLOADED.
• Point the airsoft gun in a SAFE DIRECTION.
• Open the battery compartment door by pushing down on the latch and pulling the door open.
• Pull out the battery and disconnect the plug the battery in.
• Insert the wires and battery into the stock.
• Close the battery compartment door, being sure not to pinch any wires.
4. loAdinG And UnloAdinG PlASTic BBS
A. loAdinG PlASTic BBS
Use 6 mm plastic BBs only in this airsoft gun. Use of any other ammunition can cause injury to you
or damage to the airsoft gun. We recommend using Crosman or GameFace .20g or .25 Heavy BBs.
• Make sure the airsoft gun is “ON SAFE” (section 2A).
• Point the airsoft gun in a SAFE DIRECTION.
• While supporting the BB magazine, push the magazine release button in and remove the maga-
zine).
• Open the BB loading door of the magazine and pour up to 300 – 6mm airsoft BBs into the
magazine.
• Close the BB loading door.
• Insert the loaded magazine back into the airsoft gun.
• Rotate the wind up wheel to draw plastic BBs up into the ready tube. Wind the wheel up to 75
turns for optimum performance.
noTE: IT IS IMPORTANT TO PUT THE MAGAZINE IN THE GUN PRIOR TO WINDING TO HELP AVOID
JAMS. Winding before putting into the gun can cause a jam.
B. UnloAdinG PlASTic BBS
• Make sure the airsoft gun is “ON SAFE” (section 2A).
• Point the airsoft gun in a SAFE DIRECTION.
• While supporting the BB magazine, push the magazine release button in and remove the maga-
zine.
• Do not put the magazine back in the gun.
• After reading section 7 on aiming and firing safely, take the gun ”OFF SAFE” and pull the trigger.
• Repeat these steps until you are no longer firing plastic BBs.
• Put the airsoft gun back “ON SAFE”.
• Open the BB loading door of the magazine and pour out any remaining – 6mm airsoft BBs.
• Close the BB loading door.
Never assume that because the airsoft gun no longer fires a BB and/or the loading chamber is
removed, that a BB is not lodged in the barrel. Always treat the airsoft gun as though it is loaded
and with the same respect you would a firearm.
6. USinG THE HoP-UP ModE
• This airsoft gun is manufactured with an adjustable hop-up system. The purpose of this system is
to change the spin on the BB as it leaves the muzzle, allowing you to adapt the shot for different
distances.
• To open the hop-up cover, pull out and hold the charging handle with one hand (Fig. 6).
• With the other hand turn the hop-up adjustment dial clockwise for more spin, counter-clockwise
for less spin.
7. AiMinG And fiRinG SAfElY
• You and others with you should always wear eye protection to protect eyes.
• Always point the airsoft gun in a SAFE DIRECTION.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or
ricochet and hit someone or something you had not intended to hit.
• DO NOT re-use plastic BBs because they could possibly cause damage to the airsoft gun.
• The airsoft gun is designed for target shooting and is suited for both indoor and outdoor use.
• Always remember to place the target carefully. THINK about what you will hit if you miss the target.
• When you are sure of the target and backstop, and the area around the target is clear, load and
charge the airsoft gun following sections 3 and 4. Take the airsoft gun “OFF SAFE” (section 2A)
aim and pull the trigger to fire.
• Turn counter-clockwise to move the point of impact down.
8. TRoUBlE SHooTinG/incREASinG SHooTinG EnJoYMEnT
A. MAinTAininG THE AiRSofT GUn
• DO NOT MODIFY OR ALTER THE AIRSOFT GUN. Tampering with the airsoft gun or attempts to
change the airsoft gun in any way may make it unsafe to use, may cause serious injury or death
and will void the warranty.
• If you drop the airsoft gun, visually check to see that it works properly before you use it again. If
anything seems changed, like a shorter or weaker trigger pull, this may mean parts are broken.
Call Customer Service at Crosman for assistance before using the airsoft gun again.
• Occasionally shake the gun to ensure smooth BB feeding.
• This is a high precision airsoft rifle. Prevent dust and dirt from getting into the magazine to help
maintain the performance of the airsoft rifle.
• If the efficiency of BB feeding seems to decrease, remove all the BBs from the magazine and
spray silicone oil for 1 to 2 seconds. (Note that the hop-up operation may become unstable for a
while after using silicone oil).
• An odor may be generated from the motor initially from a new airsoft gun, this is normal.
• If the airsoft gun does not fire in semi-auto mode, follow safe shooting rules and turn the gun to
full auto mode for 5 to 10 shots before returning to semi-auto mode.
• Change the battery if firing cycle becomes slow.
• Give the airsoft gun a rest for 5 to 10 minutes after about 500 BBs have been fired.
B. clEARinG A JAM
• Never look down the end of barrel to see if a jam has been cleared.
• Make sure the airsoft gun is “ON SAFE” and pointed in a SAFE DIRECTION.
• Remove magazine.
• Insert the tapered end of the cleaning rod into the barrel, with the angle toward the breech (where
the magazine connects).
• CAREFULLY and slowly apply more pressure until you push the BB out of the breech.
• Reinstall the magazine and test gun.
c. REPlAcinG THE fUSE
• Open the battery compartment door by pushing down on the latch and pulling the door open.
• Pull out the battery connector and plug the battery in.
• Open the fuse box by pushing up on the center latch (Fig. 7).
• Remove the fuse and replace with a new 20A Glass Tube Fuse.
• Close the fuse box.
• Insert the wires and battery into the stock.
• Close the battery compartment door, being sure not to pinch any wires.
9. REViEWinG SAfETY
• Do not ever point the airsoft gun at any person. Do not ever point the airsoft gun at anything you
do not intend to shoot.
• Always treat the airsoft gun as though it is loaded and with the same respect you would a firearm.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the airsoft gun pointed in A SAFE
DIRECTION.
• Always keep the airsoft gun “ON SAFE” until you are ready to shoot in a SAFE DIRECTION.
• Always check to see if the airsoft gun is “ON SAFE” and unloaded when getting it from another
person or from storage.
• Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear eye protection to protect your eyes.
• Always wear eye protection over your regular glasses.
• Use 6 mm plastic BBs only.
• Do not reuse plastic BBs because they could cause possible damage to your airsoft gun.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or
ricochet and hit someone or something you had not intended to hit.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe should
the backstop fail.
• Your backstop should be checked for wear before and after each use. All backstops are subject
to wear and will eventually fail. Replace your backstop if the surface is worn or damaged or if a
ricochet occurs.
• Do not attempt to disassemble or tamper with your airsoft gun.
• DO NOT MODIFY OR ALTER YOUR AIRSOFTGUN. Attempts to modify the airsoft gun in any way may
make your airsoft gun unsafe to use, cause serious injury or death and will void the warranty.
• Using unauthorized repair centers or modifying the function of your airsoft gun in any way may be
unsafe and will void your warranty.
• Do not put the airsoft gun away loaded. Make sure ALL of the plastic BBs are unloaded from the
airsoft gun.
• Always store this airsoft gun in a secure location.
Specifications
Mechanism/Action Electronic Velocity Up to 330 fps with .20g BBs
caliber/Ammunition 6mm Plastic BBs Battery 8.4V battery / 1100 MAH
Magazine Up to 300 6 mm BBs fuse 20A Glass Tube Fuse
Safety Lever
PERfoRMAncE: Many factors can affect velocity, including brand of projectile, type of projectile
and barrel condition.
do noT RETURn THiS PRodUcT To THE SToRE.
Our friendly customer service representatives will be glad to help. You can get answers to frequently
asked questions at www.crosman.com or you can contact us directly at 1-800-7AIRGUN (1-800-724-7486)
cUSToMER SERVicE
If this airsoft gun is not functioning, we recommend that you call Crosman Corporation Customer
service at 1-800-724-7486 or 585-657-6161. (International customers should contact their
distributor.) DO NOT ATTEMPT TO DISASSEMBLE IT! If you take it apart you probably will not be able
to reassemble it correctly. Crosman assumes no warranty responsibility under such circumstances.
For optimum performance use Crosman ® ammunition only. Using other than Crosman branded am-
munition may cause this product to malfunction and may void the warranty.
liMiTEd 90 dAY WARRAnTY
This product is warranted to the retail consumer for 90 days from date of retail purchase against
defects in material and workmanship and is transferable.
WHAT iS coVEREd
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT iS noT coVEREd
Transportation charges to Crosman for product. Damages caused by abuse, modification or failure
to perform normal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL
DAMAGES, OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WARRAnTY clAiMS
USA customers: Attach your name, address, description of problem, phone number and copy of
sales receipt to product. Package and return to Crosman Corporation, Routes 5 & 20, Bloomfield,
NY 14469.
canadian customers: Contact the Gravel Agency 418-682-3000 X46
international customers: Please return product to the nearest distributor. If you do not know the
distributor, please call 585-657-6161 and ask for our International Department for assistance.
iMPliEd WARRAnTiES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM DATE OF
RETAIL PURCHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which
cannot be preempted, it shall not be applicable. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.