Crosman ASP311 - Manual

Model ASP311
Stinger P311
6 MM AIRSOFT PISTOL
6 MM PLASTIC BB
OWNER’S MANUAL
READ ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS AIRSOFT GUN
Crosman Corporation
7629 Routes 5 & 20
Bloomfield, NY 14469
www.crosman.com
1-800-724-7486
Made in Taiwan P/N ASP311B515
WARNING:
This product contains a chemical known to the state of California to cause
cancer and birth defects (and other reproductive harms).
WARNING:
This is not a toy. Adult supervision is required. Misuse may cause serious
injury, especially to the eye. Eye protection designed for airsoft guns must be worn by the
user and any person in range. May be dangerous up to 100 yds. Read the owner’s manual
before using.
WARNING:
Do not brandish or display this airsoft gun in public – it may confuse
people and may be a crime. Police and others may think it is a firearm. Do not change the
coloration and markings to make it look more like a firearm. That is dangerous and may be
a crime. READ ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING
THIS AIRSOFT GUN.
YOU AND OTHERS WITH YOU SHOULD ALWAYS WEAR EYE PROTECTION TO PROTECT YOUR EYES.
READ ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE USING THIS AIRSOFT GUN.
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF
THIS AIRSOFT GUN.
Recommend 18 years or older to purchase. Intended for use by those 16 or older.
Please read this owner’s manual completely. And remember, this airsoft gun is not a toy. Treat it with the same re-
spect you would a firearm. Always carefully follow the safety instructions found in this owner’s manual and keep this
manual in a safe place for future use.
For questions regarding this airsoft gun, please contact Crosman at 1-800-724-7486, 585-657-6161 or www.cros-
man.com.
1. Learning the Parts of The New Airsoft gun
Learning the parts of the airsoft gun will in understanding the owner’s manual. Use this manual to increase the
enjoyment of this airsoft gun.
A. Rear Sight
B. Hammer
C. Safety (Fig. 2)
D. Grip
E. Clip
F. Magazine Release Button
G. Trigger Guard
H. Trigger
I. Muzzle
J. Slide
2. Operating the Safety
A. To Put the Airsoft Gun “ON SAFE:”
• Locate the safety on the left side of the airsoft gun.
• Push the safety up all the way for “ON SAFE” (Fig. 2A). The safety is
not “ON SAFE” unless it is pushed all the way up.
Like all mechanical devices, an airsoft gun safety can fail. Even when the
safety is “ON SAFE”, you should continue to handle the airsoft gun safely.
NEVER point the airsoft gun at any person. NEVER point the airsoft gun
at anything you do not intend to shoot.
B. To Take the Airsoft gun “OFF SAFE”:
• Push the safety all the way down for “OFF SAFE”. When the safety is all
the way down, the airsoft gun is “OFF SAFE” and can be fired. (Fig. 2B)
3. Loading and Unloading Plastic BBs
3.1 Loading Plastic BBs
• Make sure the airsoft pistol is “ON SAFE” (see Step 2A).
• While supporting the bottom of the grip with your hand to catch the
magazine, press the magazine release lever and remove the magazine
from the bottom of the grip frame (Fig. 3).
• Locate the BB guide on the side of the clip. Pull the BB guide down
and lock into place.
• Push down on the BB retainer button at the same time.
• Insert up to 12 BBs into the magazine.
• Insert the loaded clip back into the bottom of the grip frame until you
hear a click, indicating the clip is securely locked into place.
3.2 Unloading by Firing
• Make sure the airsoft pistol is pointed in a SAFE DIRECTION.
• Take the airsoft gun “OFF SAFE” and cock the airsoft pistol by firmly
holding the slide with your entire hand, pulling the slide rearward and
releasing it in a smooth motion to cock (Fig. 4).
• Point the muzzle in a SAFE DIRECTION, take “OFF SAFE” (Step 2B)
and pull the trigger to fire.
• Repeat these steps until you are no longer firing plastic BBs.
• Remove the magazine.
3.3 Unloading Without Firing
• Make sure the airsoft pistol is “ON SAFE” (see step 2A).
• Point the airsoft pistol in a SAFE DIRECTION.
• While supporting the bottom of the grip with your hand to catch the
magazine, press the magazine release lever and remove the magazine
from the bottom of the grip frame.
• Pointing the clip in a safe direction, press the BB retainer button.
NOTE: pressing the BB retainer button quickly, or without the end cov-
ered, could allow BBS to exit the magazine quickly.
WARNING: Even though you go through the unloading procedure, continue to treat the
airsoft gun as though it were loaded. Do not point at anything you do not intend to shoot.
4. Aiming and Firing Safely
• You and others with you should always wear eye protection to protect
your eyes.
• Always point the airsoft gun in a SAFE DIRECTION.
• Do not shoot at hard surfaces or at the surface of water. The plastic
BBs may bounce off or ricochet and hit someone or something you
had not intended to hit.
• DO NOT re-use plastic BBs because they could possibly cause dam-
age to the airsoft gun.
• This airsoft gun is designed for target shooting and is suited for both
indoor and outdoor use. Always remember to place the target care-
fully. THINK about what you will hit if you miss the target.
• The airsoft gun is correctly aimed when the front sight blade is position
exactly in the notch of the rear sight. The top of the front sight blade
should be even with the top of the notch in the rear sight. The bulls-
eye should appear to rest on the top of the front sight (Fig. 5).
• When you are sure of the target and backstop, and the area around
the target is clear, take the airsoft gun “OFF SAFE” (section 2A) aim
and pull the trigger to fire.
5. Clearing a Jam
Never look down the end of barrel to see if a jam has been cleared.
• Make sure the airsoft gun is “ON SAFE” and pointed in a SAFE
DIRECTION.
• Remove the loading chamber
• Insert the tapered end of the cleaning rod into the barrel, with the
angle toward the breech (where the magazine connects).
• CAREFULLY and slowly apply more pressure until you push the BB
out of the breech.
• Reinstall the magazine and test gun.
6. Maintaining The Airsoft gun
• DO NOT MODIFY OR ALTER THIS AIRSOFT GUN. Attempts to modify the airsoft gun in any way inconsistent
with this manual may make the airsoft gun unsafe to use, cause serious injury, especially to the eye and will void
the warranty.
“OFF SAFE”
Fig 2B
“ON SAFE”
Fig 2A
Fig 3
Fig 4
Fig 5
• If you drop the airsoft gun, visually check to see that it works properly before you use it again.
• If anything seems changed, like a shorter or weaker trigger pull, this may mean worn out or broken parts. Call
Crosman customer service for assistance before using the airsoft gun again.
7. Reviewing Safety
• Do not ever point the airsoft gun at any person. Do not ever point the airsoft gun at anything you do not intend
to shoot.
• Always treat the airsoft gun as though it is loaded.
• Always aim in a SAFE DIRECTION.
• Always keep the muzzle of the airsoft gun pointed in A SAFE DIRECTION.
• Always keep the airsoft gun “ON SAFE” until ready to shoot in a SAFE DIRECTION.
• Always check to see if the airsoft gun is “ON SAFE” and unloaded when getting it from another person or from storage.
• Always keep fingers off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear eye protection to protect your eyes.
• Always wear eye protection designed for airsoft over regular glasses.
• Use 6 mm plastic BBs only.
• Do not reuse plastic BBs because they could cause possible damage to the airsoft gun.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and hit
someone or something you had not intended to hit.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe should the backstop fail.
• The backstop should be checked for wear before and after each use. All backstops are subject to wear and will
eventually fail. Replace the backstop if the surface is worn or damaged or if a ricochet occurs.
• Do not attempt to disassemble or tamper with the airsoft gun.
• DO NOT MODIFY OR ALTER THIS AIRSOFTGUN. Attempts to modify the airsoft gun in any way may make the
airsoft gun unsafe to use, cause serious injury or death and will void the warranty.
• Using unauthorized repair centers or modifying the function of the airsoft gun in any way may be unsafe and will
void the warranty.
• Do not put the airsoft gun away loaded. Make sure ALL of the plastic BBs are unloaded from the airsoft gun.
• Always store this airsoft gun in a secure location.
SPECIFICATIONS
Mechanism Spring
Sights
Front: Fixed Blade
Rear: Fixed Notch
Caliber 6 mm
Ammunition Plastic BB Capacity Up to 12 BB
Length 9 inch Velocity Up to 325 fps
Weight .5 lbs Safety Lever
PERFORMANCE: Many factors can affect velocity, including brand of projectile, type of projectile and barrel condition.
DO NOT RETURN THIS PRODUCT TO THE STORE.
Our customer service representatives will help. You can get answers to frequently asked questions at www.crosman.
com or you can contact us directly at 1-800-7AIRGUN (1-800-724-7486)
CUSTOMER SERVICE
If this airsoft gun is not functioning, we recommend that you call Crosman Corporation Customer service at 1-800-
724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT ATTEMPT TO
DISASSEMBLE IT! If you take it apart you probably will not be able to reassemble it correctly. Crosman assumes no
warranty responsibility under such circumstances.
For optimum performance use Crosman ® ammunition only. Using other than Crosman branded ammunition may
cause this product to malfunction and may void the warranty.
LIMITED 30 DAY WARRANTY
This product is warranted to the retail consumer for 30 days from date of retail purchase against defects in material
and workmanship and is transferable.
WHAT IS COVERED
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT IS NOT COVERED
Transportation charges to Crosman for product. Damages caused by abuse, modification or failure to perform nor-
mal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, OR INCIDENTAL
EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA-
TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
WARRANTY CLAIMS
USA Customers: Attach your name, address, description of problem, phone number and copy of sales receipt to
product. Package and return to Crosman Corporation, Routes 5 & 20, East Bloomfield, NY 14443.
Canadian Customers: Contact the Gravel Agency 418-682-3000 X46
International Customers: Please return product to the nearest distributor. If you do not know the distributor,
please call 585-657-6161 and ask for our International Department for assistance.
IMPLIED WARRANTIES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM DATE OF RETAIL PURCHASE.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot be pre-
empted, it shall not be applicable. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.