Reattaching the lens cover – Casio XJ-S36 EN User Manual
Page 28
User Maintenance
E-28
Use the following procedure to replace the lens cover if it should accidentally become detached
from the projector.
1.
Insert the nub (
3
) of the left tab of the lens cover into the depression (
1
) of the
tab under the lens.
z When performing the above step, make sure that the lens cover is open to 90 degrees in
relation to the front of the Data Projector.
2.
Keeping the left nub (
3
) in the left depression (
1
), gently press the lens cover
towards the right as you insert the nub (
4
) of the right lens cover tab into the
depression (
2
) of the right tab under the lens.
z Do not apply undue force to the lens cover when performing the above step. Pressing too
strongly can damage the tabs of the lens cover.
Reattaching the Lens Cover
Press here with a pen or
similarly pointed object as
you slide the cover into
place.
- XJ-S46 EN XJ-S41 EN XJ-S33 User Guide XJ-S38 User Guide XJ-S53 User Guide XJ-S58 User Guide XJ-S63 User Guide XJ-S68 User Guide XJ-S32 Basic Operations XJ-S37 Basic Operations XJ-S42 Basic Operations XJ-S47 Basic Operations XJ-S52 Basic Operations XJ-S57 Basic Operations XJ-SC210 Basic Operations XJ-SC215 Basic Operations XJ-S30 Basic Operations XJ-S35 Basic Operations