Comtrol RocketPort OS/2 Device Driver User Manual
Software installation card, Rocketport, Os/2
Table of contents
Document Outline
- Product Overview
- Known Limits
- Installation Overview
- 1. Install the RocketPort board, using the instructions given in the Hardware Installation Card.
- 2. Use the bootable diagnostics to verify that the RocketPort is installed and working correctly.
- 3. Reboot into OS/2.
- 4. Create a RocketPort driver directory on your hard disk. For example: C:\ROCKET
- 5. Copy the file RCKT.SYS from the distribution media to the directory you created in Step 4.
- 6. If you have installed only ISA-bus RocketPort boards, skip to Step 7.
- 7. Edit the CONFIG.SYS file and add one driver load line, as described in “Editing the CONFIG.SYS...
- 8. Reboot your system so that your changes take effect.
- Using FINDRCKT.EXE (PCI only)
- Editing the CONFIG.SYS File
- Sample CONFIG.SYS Load Lines
- Sample Programs
- Device Driver Files
- Technical Support
- RocketPort® OS/2® Device Driver
- Software Installation Card