Troubleshooting and technical support, Troubleshooting, Comtrol support – Comtrol ES7110-VB User Manual
Page 13: Troubleshooting comtrol support
Troubleshooting and Technical Support
RocketLinx ES7110 and ES7110-VB User Guide: 2000552 Rev. C - 13
Troubleshooting and Technical Support
Troubleshooting
If you are having problems, you may want to check the following:
•
Make sure you are using the correct DC power supply.
-
ES7110: Use power supplies with 48VDC output.
-
ES7110-VB: Use power supplies with 12-24VDC output.
•
Select Ethernet cables with specifications suitable for your applications to set up your systems.
-
Ethernet cables are categorized into unshielded twisted-pair (UTP) and shielded twisted-pair (STP) cables.
-
Category 3, 4, 5, and 6 Ethernet cables are suitable for systems with 10 Mbps transmission speed.
-
For systems with 100 Mbps transmission speed, Category 5 and 6 Ethernet cables are the only suitable specifications
for this environment.
-
You also need to make sure that the distance between any two nodes does not exceed 100 meters (328 feet).
-
Use
Ethernet cabling on PoE ports.
•
If the Power LED goes off when the power cord is plugged in, a power failure might have occurred. Check the power
output connection to see if there is any error at the power source. If you still cannot solve the problem, contact Comtrol
Technical Support for assistance.
Comtrol Support
You can use one of the following methods to contact Comtrol.
Contact Method
Web Address or Phone Number
Support
Web Site
Downloads
ES7110
ES7110-VB
ftp://ftp.comtrol.com/html/rocketlinx/es7110.htm
ftp://ftp.comtrol.com/html/rocketlinx/es7110-VB.htm
Phone
763.957.6000