Chrysler 2015 Country - User Guide - Manual (Page 24)

Tether Anchorage Installation
1. Route the tether strap to provide the most direct path for the strap between the anchor and the
child seat.
2. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and
where possible, route the tether strap under the head restraint and between the two posts. If
not possible, lower the head restraint and pass the tether strap around the outboard side of the
head restraint.
3. Attach the tether strap hook of the child restraint to the top tether anchorage and remove
slack in the tether strap according to the child restraint manufacturer’s instructions.
Rear Seat Tether Strap Mounting
(Second Row Anchorage Shown)
Top Tether Strap Mounting
(Third Row 60/40 Anchorage Shown)
G E T T I N G S TA R T E D
22