Chrysler 2015 Country - User Guide - Manual (Page 11)

Emergency Key
• Should the battery in the vehicle or the Key Fob transmitter go dead, there is an emergency
key located in the Key Fob that can be used for locking and unlocking the doors. To remove the
emergency key, slide the button at the top of the Key Fob sideways with your thumb and then
pull the key out with your other hand.
• The emergency key is used to unlock/lock the driver's door and the glove compartment.
• In case the Key Fob battery is dead, use the emergency key to open the door. If the vehicle is
equipped with Keyless Enter-N-Go™, remove the Engine START/STOP button by inserting
the metal part of the emergency key under the chrome bezel at the 6 o’clock position and
gently pry the button loose.
NOTE:
The Engine START/STOP button should only
be removed or inserted with the ignition in the
LOCK position (OFF position for Keyless
Enter-N-Go™).
• With the Engine START/STOP button
removed, start the vehicle by inserting the
Key Fob in the ignition and turning to the
Start position.
CAUTION!
• If your vehicle battery becomes low or dead, your Key Fob will become locked in the
ignition.
• Do not attempt to remove the Key Fob while in this condition, damage could occur to the
Key Fob or ignition module. Only remove the emergency key for locking and unlocking
the doors.
• Leave the Key Fob in the ignition and either:
• Jump Start the vehicle.
• Charge the battery.
• Contact your authorized dealer for assistance on how to remove the Key Fob using
the manual override method.
Engine START/STOP Button Removal
G E T T I N G S TA R T E D
9