Set-up using code search – RCA RCU400R3 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Set-Up Using Code Search

Follow the steps below to set up your remote using the

Code Search method. If you complete these steps and
your device does not respond, follow the Code List
method for your device.

Programming a Device using

CODE SEARCH

1. Manually turn on your device

(TV, VCR, Cable Box).

2. Press and hold

CODE SEARCH.

PRESS

&H0LD

CODE

AUX CABLE VCR TV

3. Press and release the device button

you want to set up (TV, VCR, or fl fl fl fl

CABLE). If you are using AUX for a

device, press and release AUX, then

the device button for the type of

device to be programmed (TV,
VCR, or CABLE). The selected

device button will flash once.

4. Release

CODE SEARCH.

RELEASE

CODE

Press

OFF/ON

repeatedly until the

device turns off

(Important: you

may have to press up to 100 times
at a rate of once per second).

OFF/ON

6. Once the device turns off,

press and release

ENTER.

ENTER

With the device on, press another

button, for example

CHANNEL UP.

If the device responds, no further

programming is required. If the

device does not respond, repeat
steps 1-7.

CHAN