RCA 15491880 - Manual (Page 39)

Using the TV's Features
S E T V C R 1 ' C H A N N E L
Not connected
; • ?:Channel' 2
f 3 'Channel 3 -
Charthel 4
V . 5-Vidéo Input
Press MENU (the TT'AM/AhVffi'Vf'’appears).
Higlilight Chaunei And press OK on your ren'iote control.
Miglilight Ait!o aiul pres.s OK.
Choose whicli channel you woukl like to set;
Set VCR I Channel Displays a list that lets yoti set up the chttnnel that the
TV'' tunes to when you press the VCRl button on tlie remote.
Set VCR 2 Channel Dispkiys ti list thtit lets you set up the chtinnel that the
TV ttines to when you press the \'CR2 button.
Set DVD Channel Displat s ;i list that lets you select the diannel that the
TV tunes to wheri yoti isiess the DVD button.
Set SAT/CABLE Channel Dispkiys a list that lets you set up the channel
that the TV tunes to when you press SAT»CABLE,
5. Highlight the choice that matches the way you have the component
connected to this TV', and press OK.
The choices and a brief explanation follow:
Not connected Choose this if you don't have this particular component
connected to the TV' or if you don't want the TV to automatically tune to the
correct channel when you're using this component,
Channel 2 (SAT/CABLE only) Component (satellite or cable box) is
connected to the CABLE/ANTENNA jack on the back of the TV'', and you want
the TV to tune to channel 2 when you press the SAT» CABLE button on the
remote. Reminder; make sure the component's Channel 2/3/4 switch is set to
channel 2. Usually this switch is on the back of the component,
Channel 3 Component is connected to the CABLE/ANTENNA jack on the back
of the TV, and you want the TV to tune to channel 3 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is .set to channel 3.
Channel 4 Component is connected to the CABLE/ANTENNA jack on the
back of the TV, and y'ou want the TV to tune to channel 4 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is .set to channel 4.
Video Input Component is connected to the VIDEO jack on the back of the
TV and you want the TV to tune to VID (SVID if you used an S-Video cable)
Input Channel when you pres.s the component button.
Note: You should choose this for your VCR if you connected it to the TV
with audio/video cables.
Chapter 3 37