Connections & setup, Step 1: identifying your tv's location, Step 2: configuring for cable – RCA 15491880 User Manual

Page 18: 16 chapter 1

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections & Setup

STFP 1: itjeniiiytng Vow Location

T»

t* MX

WMch .country s your TV. located In?

Step 1: Identifying Your TV's Location

1. II yoLd'cciLintry is highlit^htfd, prtiss OK on the remote contini.

If youi' coLintry isn t highlighted, pre.ss the tip t:r clown tirrow button on the

remote control to liighliglit yotir coimtry and pres.s OK.

✓ LBA

Caiyida.,

On your TV linKM.osi llw upfiViVf. i«yi lo hiqJ'ivalit your awwet

PrestOMochoox.

STEP 1.‘ ktentrtylng Vow TV's Location

Hease enter the 5-iigit ?P code where your
TV is located.:

CHi ysu: TV remtjti.u« iriv tnupitwi keys to ?nie ygiy infamiattcn

Pliis Oli lo roiilinn

2. Use tire number btittons on your renrote to enter your zip c'ode.

Press OK when you're finislied.

Note:

Ifyourposlal code coiiUiiiis letters, press the up and down arrow

buttons on your remote to enter letters, and press the right arrow button
to go to the next space. The left arrow button moves you to the left.

Step 2: Configuring for Cable

The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program listings, the GUIDE Plus+ system needs to know if
your TV is connected to cable.

1. If your TV is connected to cable, highlight Fes' and press OK.

If your TV isn't connected to cable, highlight No and press OK (STEP 3;

Configuring for a UC7? appears).

STEP

7d.

Coniiggrlrtg for Cable

\ 4, V "ÌT'

t '

✓ Yes

;'U

On y.uii TV pwiicl?, Its« til? uplcjciwi; k?y$ w hktl’iqht yda imwFr

Pr?55 OK ts chow.

Tip

If you're not sure which channel is the
cable box's output channel, consult
the book that came with your cable
box or contact your cable company.

If you have a cable box connected to this TV, highlight Yes and press OK on
your remote control.

Note:

The next series of screens is very important because the GUIDE

Plus+ system must find the correct cable box information in order to

receive the coirect T\'program listings.

If you don’t have a cable box connected to this TV, highlight No and
pre.ss OK (STEP 3: Configuring for a UCff appears).

Chapter 1